https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010849#M93266 <P>Here is the file in .f3z format. It wouldn't let me export it as .f3d as you asked</P> Mon, 18 Jan 2021 20:24:55 GMT Anonymous 2021-01-18T20:24:55Z https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010631#M93263 <P>The base and the leg are formed as one body which I didn't intend to do. I want to split the body into just the base and the leg so that I can use a circular pattern to add more legs to the base evenly. Not sure how to do that, thanks in advance!&nbsp;&nbsp;</P> Mon, 18 Jan 2021 19:03:59 GMT https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010631#M93263 Anonymous 2021-01-18T19:03:59Z https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010655#M93264 <P>Can you File&gt;Export your *.f3d file to your local drive and then Attach it here to a Reply?</P><P>&nbsp;</P><P>I am guessing Edit Feature &gt;New Body.</P><P>Offset surface (in Timeline) and Split would also work.</P> Mon, 18 Jan 2021 19:16:13 GMT https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010655#M93264 TheCADWhisperer 2021-01-18T19:16:13Z https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010840#M93265 <P>Here is the file in .f3z format. It wouldnt let me export it as .f3d as you asked</P> Mon, 18 Jan 2021 20:21:31 GMT https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010840#M93265 Anonymous 2021-01-18T20:21:31Z https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010849#M93266 <P>Here is the file in .f3z format. It wouldn't let me export it as .f3d as you asked</P> Mon, 18 Jan 2021 20:24:55 GMT https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010849#M93266 Anonymous 2021-01-18T20:24:55Z https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010855#M93267 Here is the file in .f3z format, wouldnt allow me to export as .f3d format<BR />as you asked<BR /> Mon, 18 Jan 2021 20:27:20 GMT https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010855#M93267 Anonymous 2021-01-18T20:27:20Z https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010881#M93268 <P>It is a very simple task to make two bodies from your model.&nbsp; Go back and edit the last extrusion you did and change the Operation to New Body instead of Join.&nbsp; I also show you how to export your model as an .F3D file which is preferred by the forum users.&nbsp; Mode is attached as an F3D file.</P> <P><IFRAME src="https://screencast.autodesk.com/Embed/Timeline/0b6c3521-0007-4ce0-8a7f-4fab76b9d642" width="960" height="850" frameborder="0" allowfullscreen="allowfullscreen" webkitallowfullscreen="webkitallowfullscreen"></IFRAME></P> Mon, 18 Jan 2021 20:38:07 GMT https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10010881#M93268 jhackney1972 2021-01-18T20:38:07Z https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10011008#M93269 <P>Thank you!</P> Mon, 18 Jan 2021 21:44:00 GMT https://forums.autodesk.com/t5/fusion-support-forum/attempting-to-split-the-leg-from-the-base-of-the-design/m-p/10011008#M93269 Anonymous 2021-01-18T21:44:00Z