topic Asymetric extrusion of a disc. in Fusion Support Forum

Asymetric extrusion of a disc.

br-hodd — Wed, 27 Jan 2021 14:28:43 GMT

Looking to extrude a disk with 2 different thicknesses 180 degrees apart. Eks. 5mm/2mm

Re: Asymetric extrusion of a disc.

TheCADWhisperer — Wed, 27 Jan 2021 14:36:43 GMT

What is the problem you are experiencing in doing this?

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Asymetric extrusion of a disc.

br-hodd — Thu, 28 Jan 2021 08:38:46 GMT

Hi and thanks for a prompt reply.

I am trying to draw an image (see attachment) of several discs in layers. It will be eventual a gaiter for 3D printing.

The discs have tapering thicknesses. Cannot seem to find a solution in Fusion.

Regards

Brian

Re: Asymetric extrusion of a disc.

g-andresen — Thu, 28 Jan 2021 09:50:58 GMT

Hi,

There is no picture.

Try again.

günther

Re: Asymetric extrusion of a disc.

g-andresen — Thu, 28 Jan 2021 10:32:56 GMT

Hi,

maybe you´re looking for something like this?

Screencast

günther

Re: Asymetric extrusion of a disc.

br-hodd — Fri, 29 Jan 2021 09:12:46 GMT

Hi and thanks for your reply/suggestion.

I certainly can us this.

Regards
Brian

Re: Asymetric extrusion of a disc.

g-andresen — Fri, 29 Jan 2021 13:39:29 GMT

Hi,

I'm glad it worked.

Please mark contributions that made a solution by checking them as "Accepted Solution".
This will make it easier for future readers.

günther