topic Re: I need help in Fusion Support Forum

I need help

FacebookGroupMember — Thu, 28 Jan 2021 20:36:18 GMT

I need help. I'm trying to take the selected face and move it laterally by 20 mm to create a slant. I have tried EVERYTHING I can think of and I get nowhere. It's so frustrating because I am certain that it's something simple.

What am I doing wrong?

Make sure the face is highlighted and put the move icon o...

FacebookGroupMember — Thu, 28 Jan 2021 20:36:20 GMT

Make sure the face is highlighted and put the move icon on one end, the corner or the middle should do it, then use the angle handle to change its angle.

Daniel Lyall, how? This is literally the one thing not co...

FacebookGroupMember — Thu, 28 Jan 2021 20:36:22 GMT

Daniel Lyall, how? This is literally the one thing not covered in my instructions.

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 21:08:38 GMT

Have a look at this https://autode.sk/3sZ6H8a

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 21:13:42 GMT

Daniel Lyall, thank you but I wasn't talking about that. I want to take that face and move laterally. So that face will make all the slots lateral at an angle. As is, they remain vertical. (What I am suggesting is a basic function of virtually every 3d editing software, this shouldn't be a hard ask.)Do I have to I have to extrude at an angle? How would you do that?

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 21:33:39 GMT

Yes, that would be a draft it's under the modified menu. Extrude the holes straight down - select the faces you want to be moved as the faces then select the top for the pull direction then do the same thing again to the opposite side.

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 21:33:40 GMT

Daniel Lyall, thank you.

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 21:53:39 GMT

Thank you, but that isn't what I am looking for either, it's just a different way of doing the the exact thing that I don't want to do. It's hinging the face upward and downward. Not moving the face laterally, in any sense of the Word. It does this...

I appreciate your help, I really do. But I think I am miss communicating.

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 22:03:38 GMT

Joshua Eichler Can you do a sketch profile of the shape you want?

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 22:03:39 GMT

Daniel Lyall, on the outside. But not the interior.

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 22:08:40 GMT

like a split view

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 22:08:42 GMT

How do I do that?

And thank you VERY much for being so patient with me.

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 22:13:39 GMT

Try this you have an addon for fusion called screencast get your self this https://knowledge.autodesk.com/search-result/caas/simplecontent/content/download-autodesk-screencast.html

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 22:13:41 GMT

Then do a section analysis of the part sect a long faces and push it in so it goes into the model, then use this visual to explain what you want.

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 22:13:44 GMT

This is what I was meaning with the draft tool https://autode.sk/39u4z0F

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 22:58:42 GMT

Did you use one sketch to make this?

Re: I need help

FacebookGroupMember — Thu, 28 Jan 2021 23:03:41 GMT

Erik LaFleur, I don't know how to do more than one.

Re: I need help

FacebookGroupMember — Fri, 29 Jan 2021 00:08:43 GMT

You could create a plane on an angle and then split the body and cut the part You don't need away all together If I'm understanding your question correctly