topic Re: Bug merging faces in Surface mode with working example in Fusion Support Forum

Bug merging faces in Surface mode with working example

soswow — Sat, 20 Feb 2021 10:55:25 GMT

Hello,

I've spend 2 days now trying to solve this problem. I am pretty sure it's a bug. Like 100%.

I had much bigger design, that I stripped down to bare minimum of faces to demonstrate a problem. I am attaching working f3d file with that example. Also, I am posting a screencast where you can see a problem.

So, I can't stitch some faces unless some other, seemingly unrelated faces are removed first. Faces I want to stitch has perfectly aligned edges. I know that because those faces were unstitched before.

I am not sure I will be able to get back to solid with my main project at this point =(

Re: Bug merging faces in Surface mode with working example

TheCADWhisperer — Sat, 20 Feb 2021 15:32:13 GMT

@soswow wrote:
I've spend 2 days now trying to solve this problem.

See Attached *.f3d file.

Re: Bug merging faces in Surface mode with working example

soswow — Sat, 20 Feb 2021 22:05:57 GMT

I don't think this is related. You can delete that face and you still have a problem.

But regardless. I found that the solution while making this post, but this post is not about asking for solution, but rather either explain how this is not a bug and teach me something, or accepts it's a bug, put it on a backlog so future peeps like me don't spend time banging their heads against the wall.

Re: Bug merging faces in Surface mode with working example

jeff_strater — Mon, 22 Feb 2021 03:59:01 GMT

there does seem to be a problem here. We will look into it. However, we'd also like to try to reproduce it. If you could share a solid that cannot be round-tripped (unstitch, followed by stitch that is unsuccessful), that would help us figure out how things got into this state in the first place. Thanks.