topic Re: fusion 360 freezing on startup from today in Fusion Support Forum

fusion 360 freezing on startup from today

nicolo.catapano — Wed, 17 Mar 2021 22:16:46 GMT

Hello, first of all i have to apologize for my english, I am not native speaker so please forgive my errors. Today I was drawing with fusionn360 and everything was smooth. After couple of hours after last work nightmare start. I can't open fusion anymore, it just freeze on start and stay on "not responding" (see sceenshot). I tried everything, update driver, unistall driver, unistall fusion, clean unistall fusion and everything I could find on the forum. I also created a new user account on my windows and there everythings work smooth, but on my main account i did not install nothing new between the working and not working. Also, couple of time after 15/20 min fusion360 started.

I attach a log of a very slow but working start (29kb log) and a not working one(6kb)

Tyvm for your help, Best regars, NC

Re: fusion 360 freezing on startup from today

kristian.kloften — Fri, 19 Mar 2021 11:58:28 GMT

I Have the same issue as you describe above. Tried everything asewell, but nothing helps. Tried the troubleshooting form without any luck (https://forms.office.com/Pages/ResponsePage.aspx?id=nve_Z5F_M0So5cklLS3cHZr74G_JsKBNspPh7Qs7_GZUQTFESkxGR0w3V0VOSktZS1VYRzA5M1VNVSQlQCN0PWcu)

The same issue happens on my stationary computer and laptop. Both using windows.

Regards
Kristian

Re: fusion 360 freezing on startup from today

nicolo.catapano — Fri, 19 Mar 2021 12:00:31 GMT

i resolved this with a fresh windows install, but is not handy