topic Re: Chamfer and taper angle feature broken in Fusion Support Forum

Chamfer and taper angle feature broken

Anonymous — Fri, 19 Mar 2021 17:49:21 GMT

I used to be able to extrude virtually any shape with a negative taper angle up all the way to a point without error messages and now it simply will not perform this function. I did this exact operation 2 weeks ago on a specific drawing and it worked fine. Attempting to do the same basic process again today, even using the same sketch or very basic shapes, and it just will not work. I just keep getting error messages to change the angle shape or distance. Its like I now have to know the exact height to match the angle to taper to a point. Did Fusion update or change something? I am literally performing the same exact operation that worked previously with the same exact sketch but now it won't go.

Re: Chamfer and taper angle feature broken

jhackney1972 — Fri, 19 Mar 2021 17:59:53 GMT

Works OK on this end. Please Attach you model so the forum users can take a look. Open you model in Fusion 360, select the File menu, then Export and save to your hard drive. Attach it using the Attachments section below in a forum reply.

Re: Chamfer and taper angle feature broken

jhackney1972 — Fri, 19 Mar 2021 18:44:30 GMT

Since you have not shared your model, I will share one that demonstrates, what I think you are describing, works just fine. If I missed something, please let me know.