https://forums.autodesk.com/t5/fusion-support-forum/3d-adaptive-rest-machining-not-working/m-p/10172056#M87608 <P>Hello, having trouble with 3D Adaptive with continue rest machining not completing path calculation when stepdown is under 1.7mm. Left it computing overnight and it stays at 80% taking 40% of cpu. If i put it over 1.7mm it works but cant run it so high. There was problems on it earlier but it got fixed. Is this related to that?&nbsp;</P><P>Thank you.</P> Sat, 20 Mar 2021 09:26:34 GMT j6755 2021-03-20T09:26:34Z https://forums.autodesk.com/t5/fusion-support-forum/3d-adaptive-rest-machining-not-working/m-p/10172056#M87608 <P>Hello, having trouble with 3D Adaptive with continue rest machining not completing path calculation when stepdown is under 1.7mm. Left it computing overnight and it stays at 80% taking 40% of cpu. If i put it over 1.7mm it works but cant run it so high. There was problems on it earlier but it got fixed. Is this related to that?&nbsp;</P><P>Thank you.</P> Sat, 20 Mar 2021 09:26:34 GMT https://forums.autodesk.com/t5/fusion-support-forum/3d-adaptive-rest-machining-not-working/m-p/10172056#M87608 j6755 2021-03-20T09:26:34Z https://forums.autodesk.com/t5/fusion-support-forum/3d-adaptive-rest-machining-not-working/m-p/10172074#M87609 <P>Could you share your file?<BR />File &gt; Export &gt; Save to local folder, return to thread and attach the .f3d file in your reply</P> Sat, 20 Mar 2021 09:44:07 GMT https://forums.autodesk.com/t5/fusion-support-forum/3d-adaptive-rest-machining-not-working/m-p/10172074#M87609 seth.madore 2021-03-20T09:44:07Z https://forums.autodesk.com/t5/fusion-support-forum/3d-adaptive-rest-machining-not-working/m-p/10172087#M87610 <P>Customer part so i cant share it. Have to see if i can make a similar part and share that. But not until monday.</P> Sat, 20 Mar 2021 09:51:51 GMT https://forums.autodesk.com/t5/fusion-support-forum/3d-adaptive-rest-machining-not-working/m-p/10172087#M87610 j6755 2021-03-20T09:51:51Z