topic Re: Fusion freezing no matter what. in Fusion Support Forum

Fusion freezing no matter what.

anthonyrossi01 — Sun, 28 Mar 2021 18:05:50 GMT

I have been trying for about 4 hours not to get fusion to create a pattern on path. I computed the same path with a cut and took about 2 minutes to compute total. After editing the drawing a bit, the original pattern turned out to not be needed however the program fills the hard drive with over 100 GB of files and refuses to do anything but continue filling the hard drive if I try to delete it from the timeline. I am also unable to create the new path for the stand off in the file as it just freezes and fills the drive just the same.

On the brighter side, I discovered that if you click off the Submit Report, you don't have to waste time trying to select the close button and it will just sit in the background till fusion 360 freezes the same way it has been for 6 months now.

https://a360.co/3w7sOLd

Re: Fusion freezing no matter what.

g-andresen — Sun, 28 Mar 2021 19:55:32 GMT

Hi,

as long as you don't explain what you want to use as a path it becomes impossible to give any hints.
Your sketches are full of various contours.
Unfortunately, none of them is suitable for a path for the entire pattern.

günther

Re: Fusion freezing no matter what.

anthonyrossi01 — Sun, 28 Mar 2021 19:58:20 GMT

Weird because as I said one already computed.

Re: Fusion freezing no matter what.

g-andresen — Sun, 28 Mar 2021 20:49:05 GMT

Hi,

Just create only one path for the entire object.

günther

Re: Fusion freezing no matter what.

anthonyrossi01 — Sun, 28 Mar 2021 21:31:05 GMT

Only one is being used.. Sorry but I just spent 8 hours and it only got worse to the point I had to hard boot my desktop so I am done for the day having nothing accomplished and the same issue continuing to give me problems from when I first starting asking for help here months ago.

Re: Fusion freezing no matter what.

jeff_strater — Mon, 29 Mar 2021 01:32:01 GMT

"the original pattern turned out to not be needed however the program fills the hard drive with over 100 GB of files and refuses to do anything but continue filling the hard drive if I try to delete it from the timeline."

I looked at the design you shared. I cannot see a pattern on path in this design. So, it appears that you were able to eventually delete this feature? The design appears to be of reasonable size, and performs well when I open it. If you can add more information about the problems you are having with this design, we can investigate further.

Re: Fusion freezing no matter what.

g-andresen — Mon, 29 Mar 2021 07:10:55 GMT

Hi,

Please describe which object you want to duplicate at which path.

günther