topic Re: Error: Edit Surface Revolve, Axis get added to Profiles. in Fusion Support Forum

Error: Edit Surface Revolve, Axis get added to Profiles.

KristianLaholm — Thu, 01 Apr 2021 19:55:31 GMT

On editing a Surface Revolve I get an error if I used a sketch line as axis.
The error comes from that the axis gets added to the profiles.

Re: Error: Edit Surface Revolve, Axis get added to Profiles.

KristianLaholm — Thu, 01 Apr 2021 19:54:11 GMT

Link to Screencast https://knowledge.autodesk.com/community/screencast/19577110-cf1d-42f1-916a-103a05f7329b

Re: Error: Edit Surface Revolve, Axis get added to Profiles.

TheCADWhisperer — Thu, 01 Apr 2021 20:14:08 GMT

Axis selected in Profile.

Ctrl or CMD unselect the axis as Profile.

Well, this is interesting.

I edit the sketch and change the axis to Construction.

Delete the Revolve and recreate and it still selects both lines as Profile even though I select only the solid line.

Re: Error: Edit Surface Revolve, Axis get added to Profiles.

jhackney1972 — Thu, 01 Apr 2021 20:10:22 GMT

The best solution is not to sketch the revolve axis but to use the Z axis instead. But since you asked the question, just change the vertical line from an object line to a construction line, then the program will ignore it. Model attached.

Re: Error: Edit Surface Revolve, Axis get added to Profiles.

KristianLaholm — Thu, 01 Apr 2021 20:27:19 GMT

The workaround using a construction line is the one I'm using if there is no axis to use.

But I think the behavior (adding axis to profiles on edit) is new, I can't recall noticing this behavior earlier.

Re: Error: Edit Surface Revolve, Axis get added to Profiles.

HughesTooling — Fri, 02 Apr 2021 17:48:15 GMT

@jeff_strater Is this a known bug?

Thanks Mark

Re: Error: Edit Surface Revolve, Axis get added to Profiles.

davebYYPCU — Fri, 02 Apr 2021 20:44:14 GMT

Cancel Chain Select,

If happens with that off, then it is a new process.

Might help...

Re: Error: Edit Surface Revolve, Axis get added to Profiles.

jeff_strater — Fri, 02 Apr 2021 23:06:58 GMT

no, that is a new one on me. Head-scratcher. I created FUS-80829 for this one.