topic Re: Trace tool path bug in Fusion Support Forum

Trace tool path bug

gmdimarzio88 — Fri, 09 Apr 2021 16:06:53 GMT

Since the April 2021 update I get this when i try to use the Trace toolpath.

Re: Trace tool path bug

g-andresen — Fri, 09 Apr 2021 16:22:53 GMT

Hi,

What are you trying to do?

Please share the file.

File > export > save as f3d on local device > attach it to the next post.

günther

Re: Trace tool path bug

gmdimarzio88 — Fri, 09 Apr 2021 17:27:11 GMT

Here's a dummy file. Same issue.

Re: Trace tool path bug

jhackney1972 — Fri, 09 Apr 2021 18:38:59 GMT

Well it works perfectly using a Fusion 360 Subscription License. @seth.madore has the rules changed for this type of toolpath under other Fusion 360 license types? Model is returned, see if my toolpath gives you the error also.

Re: Trace tool path bug

HughesTooling — Fri, 09 Apr 2021 18:44:38 GMT

Have you used Tilt and Turn in the past? Reason I ask is I get the same error with your OP but can create a new one. Just wondering if you used the extensions in the past and did a Make All Default. Below you can see in Compare and Edit your op has the degrees in black but my new one is green showing unchanged\default. I've attached my file, try selecting the op and select Save Parameters as Default and try creating a new trace OP.

Mark

Re: Trace tool path bug

HughesTooling — Fri, 09 Apr 2021 18:43:52 GMT

@jhackney1972 Did you try generating the original OP rather than create a new one?

Mark

Re: Trace tool path bug

jhackney1972 — Fri, 09 Apr 2021 18:48:42 GMT

Yes, it would not repair. I then took your idea, right click on my generated toolpath, Save Parameters as Default, and tried to Generate his over again, it did not help.

Re: Trace tool path bug

HughesTooling — Fri, 09 Apr 2021 18:56:13 GMT

@jhackney1972 wrote:

Yes, it would not repair. I then took your idea, right click on my generated toolpath, Save Parameters as Default, and tried to Generate his over again, it did not help.

There doesn't seem to be a way to reset an existing OP to the system defaults so no way to fix an existing OP.

Mark

Re: Trace tool path bug

gmdimarzio88 — Fri, 09 Apr 2021 20:04:34 GMT

I've been using that trace template for 3 years. And I do have a subscription license. This was working Monday. Did the update yesterday, now it's not working.

Re: Trace tool path bug

seth.madore — Sun, 11 Apr 2021 23:52:15 GMT

There is a known bug that will be addressed shortly in a hotfix.