topic Re: How can I cut this spline? in Fusion Support Forum

How can I cut this spline?

Anonymous — Wed, 12 May 2021 07:10:08 GMT

To loft the head part, want to cut this highlighted spline using "break" in the sketch mode. But the ribs are made after and is referenced by the spline, so when I enter "edit sketch", it appears like this, with no ribs.

How possibly can I cut this spline??

Re: How can I cut this spline?

g-andresen — Wed, 12 May 2021 09:49:36 GMT

Hi,

Please share the file.

1. What sketch

2. position for cutting

File > export > save as f3d on local drive > attach it to the next post

günther

Re: How can I cut this spline?

Anonymous — Fri, 14 May 2021 13:59:50 GMT

I want to cut the top spline and the bottom spline of the sketch with all intersecting lines.

Re: How can I cut this spline?

g-andresen — Fri, 14 May 2021 14:31:11 GMT

Hi,

1. create a new sketch on the same plane as Sketch 9

2, project the contour (sketch 9) into it (projection link unchecked)

3. create intersections to involved sketches

4. "Break" spline at desired points

günther