topic After Update 2.0.10244 Pipe command has issues in Fusion Support Forum

After Update 2.0.10244 Pipe command has issues

Anonymous — Sat, 29 May 2021 00:11:16 GMT

I am seeing problems with Pipe after the latest update. It seems like it is stuck on chain selection even when its not checked also it will make the pipe solid even when hollow is checked and section thickness is filled out. I have found if you toggle the chain box and the hollow box on and off and then select your line it seems to work correctly. Then if you use pipe again on another line you have to toggle the boxes again.

Re: After Update 2.0.10244 Pipe command has issues

jhackney1972 — Sat, 29 May 2021 01:24:16 GMT

I cannot replicate your issues. Could you please create a Screencast to demonstrate what you are seeing. Be sure to show the Pipe dialog box as you demonstrate.

Re: After Update 2.0.10244 Pipe command has issues

Anonymous — Sat, 29 May 2021 03:38:55 GMT

I made a video to show my issue's

Re: After Update 2.0.10244 Pipe command has issues

Anonymous — Sat, 29 May 2021 03:45:38 GMT

https://autode.sk/3uyl4Qi

Re: After Update 2.0.10244 Pipe command has issues

jeff_strater — Sat, 29 May 2021 04:03:08 GMT

seems to work for me. Have you tried restarting Fusion?

Re: After Update 2.0.10244 Pipe command has issues

Anonymous — Sat, 29 May 2021 04:16:46 GMT

Yes I have restarted it. I have tried it on 3 different computers same results I even did the clean uninstall and reinstall.

Re: After Update 2.0.10244 Pipe command has issues

HughesTooling — Sat, 29 May 2021 12:06:51 GMT

@jeff_strater The chaining checkbox bug has been around for ages, think it's in other commands as well. Your test you toggled it so didn't see the problem. It seems the hollow option has the same problem where it uses the default state not the last used state and what's showing on the dialog.

Screencast shows same behaviour as @Anonymous's example.

Mark

Re: After Update 2.0.10244 Pipe command has issues

Anonymous — Sat, 29 May 2021 13:13:12 GMT

Humm weird never had either issue come up ever until the last update. Pipe is my most used tool other than line I cant use any chains as the program for my plasma tube cutter doesn't like what Fusion exports if its made from a chain. I guess I'll have to live with double clicking each checkbox everytime I select pipe.

Re: After Update 2.0.10244 Pipe command has issues

HughesTooling — Sat, 29 May 2021 13:33:23 GMT

@Anonymous There is a chance it got fixed for a while. Can't remember what other commands I've seen the problem with.

Mark

Re: After Update 2.0.10244 Pipe command has issues

HughesTooling — Sat, 29 May 2021 13:45:00 GMT

Here's another example using the surface version of revolve. Neither of these examples are features I use that often so I think there are some others. @jeff_strater Do you need examples of all the features or will fixing one feature fix the others?

Mark

Re: After Update 2.0.10244 Pipe command has issues

HughesTooling — Sat, 29 May 2021 13:58:36 GMT

Also a problem in sweep! Unchecked in first sweep second sweep has chain unchecked from previous use but still selects a chain.

Edit, this is a feature I use quite often and where the problem's been around for ages.

Re: After Update 2.0.10244 Pipe command has issues

jeff_strater — Sat, 29 May 2021 15:03:46 GMT

ah. OK, good to know. I remember another issue like this, where the command was not correctly setting the correct last value. Yes, a list would be helpful, as this does tend to be command-specific.

Re: After Update 2.0.10244 Pipe command has issues

Prophet_Barnes — Sun, 13 Jun 2021 13:00:04 GMT

I'm facing exactly the same issue and have observed the same behaviour with the pipe tool.

Re: After Update 2.0.10244 Pipe command has issues

Anonymous — Sun, 11 Jul 2021 18:21:26 GMT

Issue seems fully fixed now in version 2.0.10440 Pipe tool works great now.