topic Re: Profile Finishing Stock To Leave Error - Turning CAM in Fusion Support Forum

Profile Finishing Stock To Leave Error - Turning CAM

brandon_hanoun — Mon, 31 May 2021 23:51:31 GMT

I'm using a round grooving tool with a diameter of 0.1181".

When using the profile finishing toolpath I want to have -0.0015" X stock to leave, however I get "

The negative allowance must be smaller than the tool corner radius." while using that value or any other negative value I try.

Seeing as the message doesn't make sense because the round tool is much bigger than the negative stock to leave I've concluded it's a bug.

Any solutions?

seth.madore — Tue, 01 Jun 2021 11:17:42 GMT

Could you share your file?
File > Export > Save to local folder, return to thread and attach the .f3d file in your reply

brandon_hanoun — Mon, 07 Jun 2021 22:34:54 GMT

Please see attached.

One of the tools has been changed in the CAM to work but the error still persists.

seth.madore — Tue, 08 Jun 2021 10:04:37 GMT

Yep, I see what you mean. As a workaround, define the tool as a Square insert with corner rads of .1181/2

This will allow you to input a negative Stock to Leave. I'll open a ticket today on this

seth.madore — Sat, 12 Jun 2021 13:11:51 GMT

CAM-30196 for reference

akash.kamoolkar — Tue, 21 Sep 2021 17:59:01 GMT

@brandon_hanoun This issue has been fixed in the update that recently went live.

Regards,

Akash Kamoolkar