topic Re: [Bug report] Appearance on component body faces is lost in Fusion Support Forum

[Bug report] Appearance on component body faces is lost

motla.design — Thu, 10 Jun 2021 15:29:04 GMT

Hi,

I noticed a bug with the appearance function when it is applied on a component:

1 - Make a sketch and extrude it selecting "New Component"
2 - Apply an appearance to the whole component body
3 - Apply another appearance to a face of the component body
4 - Now go back and forth in the timeline, the appearance that was set on the face is lost

Thanks

Fusion 360 v2.0.10253
Active Plan: Fusion 360, Subscription
macOS 10.15.7

Screencast URL : https://knowledge.autodesk.com/community/screencast/b33ff25a-cc9e-4de2-a6f8-993a8c560df1

Another bug is that i'm unable to embed the screencast, it says "Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied." and removes the screencast.

Re: [Bug report] Appearance on component body faces is lost

Phil.E — Fri, 11 Jun 2021 20:58:51 GMT

Thanks for the report and clear steps to reproduce the issue. I logged a ticket for the bug.

I found that if you use Compute All the face appearance will be restored.

(internal reference: FUS-84801)

Thanks,

Re: [Bug report] Appearance on component body faces is lost

motla.design — Wed, 16 Jun 2021 07:56:13 GMT

Thanks for the workaround @Phil.E . It saves me a lot of time.

Re: [Bug report] Appearance on component body faces is lost

Luke_AU — Mon, 19 May 2025 10:16:21 GMT

This bug is persists 4 years later in 2025...

Confirming that Solid -> Modify -> Compute All is the fix.

Glad I found this page after much troubleshooting.