topic Re: Inserted Canvas is no longer visible in Fusion Support Forum

Inserted Canvas is no longer visible

2davidcampbell — Wed, 07 Jul 2021 17:06:57 GMT

I am very new to Fusion 360 and am having trouble with an inserted canvas. I was able to insert and calibrate the canvas and begin sketching. The image is a jpeg of a home floor plan. However, after saving my latest version the canvas field now shows up gray but the image is not visible. Did I accidentally turn something off? Any suggestions would be helpful.

Thank you,

Re: Inserted Canvas is no longer visible

jhackney1972 — Wed, 07 Jul 2021 17:13:12 GMT

Attach your model file and let the forum users take a look, attach the JPEG as well. If you do not know how to attach your Fusion 360 model follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save to your hard drive. Then use the Attachments section of a forum post to attach it.

Re: Inserted Canvas is no longer visible

2davidcampbell — Wed, 07 Jul 2021 20:09:27 GMT

I have attached the file.

Thank you

Re: Inserted Canvas is no longer visible

jhackney1972 — Wed, 07 Jul 2021 20:15:44 GMT

You did not attach the image file that you created the canvas from, please do that also.

Re: Inserted Canvas is no longer visible

2davidcampbell — Wed, 07 Jul 2021 20:18:59 GMT

Here is the canvas file.

Re: Inserted Canvas is no longer visible

jhackney1972 — Wed, 07 Jul 2021 20:27:12 GMT

Once I had the JPEG, a simple refresh fixed the issue. Did you do the same or attempt to? When this happens again, be sure you Edit the Canvas and reselect the image file, most of the time it will update. There is a possibility that you may have also move the JPEG from the original folder that you attached the canvas from. Model is attached.

Re: Inserted Canvas is no longer visible

2davidcampbell — Wed, 07 Jul 2021 21:35:07 GMT

No I didn't. Not sure what you mean by refreshing the JPEG

Re: Inserted Canvas is no longer visible

jhackney1972 — Wed, 07 Jul 2021 21:41:52 GMT

Basically re-assigning the JPEG to the canvas which makes sure Fusion 360 is looking at the right image file in the right folder.

Re: Inserted Canvas is no longer visible

2davidcampbell — Wed, 07 Jul 2021 21:53:34 GMT

Thank you John, I appreciate your help.

Re: Inserted Canvas is no longer visible

bernie_rihn — Tue, 23 Jul 2024 06:31:33 GMT

how is this still a bug? just happened.

Re: Inserted Canvas is no longer visible

bernie_rihn — Tue, 23 Jul 2024 06:37:11 GMT

aaaaand i can't actually "refresh" it because it loses all my positioning and scaling. *blows brains out*

how do people use this?

Re: Inserted Canvas is no longer visible

jechristJE5J2 — Sat, 03 May 2025 23:45:21 GMT

This same thing has just happened to me (2 May 2025). "The image" outline is still there, calibrated, moved and aligned (appearance-wise) but the actual image is not showing. If I refresh in the way shown in this thread (thanks for the video), the image reappears but it is not calibrated and aligned. Now that I am done with the model, I wanted to compare one last time to the model. This is a real drag that the image is not showing.
P.S. This has nothing to do with the "timeline" of the canvas since it was added well before any of the modeling occurred and has not been moved in the timeline. Any thoughts?

Re: Inserted Canvas is no longer visible

TheCADWhisperer — Sun, 04 May 2025 00:05:57 GMT

@jechristJE5J2

Can you File>Export your *.f3d file that exhibits this behavior to your local drive and then Attach it here to a Reply?

Re: Inserted Canvas is no longer visible

jechristJE5J2 — Mon, 05 May 2025 15:59:56 GMT

I have two canvases in this .f3d file that are both from .jpg files (all
files are included in this email). They have both "disappeared". The
image/canvas I care most about is the one labeled Spirit100_canopySide.jpg.
It is the one in the XY plane or showing in the "Front" view. Any
suggestions are appreciated. As a side, I also can't seem to get the two
"bubble" half to "combined". One is a mirror of the other. I'm not super
concerned about that other than slightly interested in why they won't
combined. I can't say I am a Fusion 360 expert... 😉
Thanks for help in advance,
Jeff Christensen

Re: Inserted Canvas is no longer visible

TheCADWhisperer — Mon, 05 May 2025 20:01:20 GMT

Hmmm, that is interesting.

I replied earlier today and my post is gone?

Pinging @CGBenner

@jechristJE5J2

Cannot use email replies - must reply by the web forum

Re: Inserted Canvas is no longer visible

jechristJE5J2 — Tue, 06 May 2025 01:51:42 GMT

I look forward to any feedback you can provide.

Re: Inserted Canvas is no longer visible

TheCADWhisperer — Tue, 06 May 2025 11:44:36 GMT

@jechristJE5J2 wrote:
(all files are included in this email).

@jechristJE5J2

I'll try one more time.

You cannot attach files by email reply.

You must use the web-based forum.

Re: Inserted Canvas is no longer visible

jechristJE5J2 — Tue, 06 May 2025 16:29:16 GMT

Here is an abridged version of the email I sent with the files attached to the "web forum" reply.

I have two canvases in this .f3d file that are both from .jpg files. They have both “disappeared”. The image/canvas I care most about is the one labeled Spirit100_canopySide.jpg. It is the one in the XY plane or showing in the “Front” view. Any suggestions are appreciated. As a side, I also can’t seem to get the two “bubble” half to “combined”. One is a mirror of the other. I’m not super concerned about that other than slightly interested in why they won’t combined.

Re: Inserted Canvas is no longer visible

jechristJE5J2 — Thu, 22 May 2025 22:44:34 GMT

So I provided all of the files you requested via this forum and I am still waiting for a response.

Re: Inserted Canvas is no longer visible

thetomerpeer — Wed, 04 Jun 2025 10:47:25 GMT

This just happened to me as well. In my case, I accidentally moved the image file, which made it disappear, but it wouldn't reappear after returning the image back to the original directory. As others already said, re-loading the same image loses the calibration, so that solution won't work at the moment.

Is there a good way to resolve this issue?

Also, why isn't the image data being saved into the project file to prevent this kind of silly problems?