https://forums.autodesk.com/t5/fusion-support-forum/manufacture-gt-printer-settings/m-p/10474526#M76813 <P>I wanted to give 1.6 mm shell thickness. So, I gave perimeter extrusion width as 0.4 mm and number of perimeters as 4. Is this correct?</P> Fri, 16 Jul 2021 15:39:50 GMT sriram.venkatesh2019 2021-07-16T15:39:50Z https://forums.autodesk.com/t5/fusion-support-forum/manufacture-gt-printer-settings/m-p/10472499#M76812 <P>Where can I find the settings to change the "SHELL THICKNESS" for 3D printing in the manufacture section of Fusion 360?</P> Thu, 15 Jul 2021 22:29:27 GMT https://forums.autodesk.com/t5/fusion-support-forum/manufacture-gt-printer-settings/m-p/10472499#M76812 sriram.venkatesh2019 2021-07-15T22:29:27Z https://forums.autodesk.com/t5/fusion-support-forum/manufacture-gt-printer-settings/m-p/10474526#M76813 <P>I wanted to give 1.6 mm shell thickness. So, I gave perimeter extrusion width as 0.4 mm and number of perimeters as 4. Is this correct?</P> Fri, 16 Jul 2021 15:39:50 GMT https://forums.autodesk.com/t5/fusion-support-forum/manufacture-gt-printer-settings/m-p/10474526#M76813 sriram.venkatesh2019 2021-07-16T15:39:50Z