topic Re: Contact set model animation in Fusion Support Forum

Contact set model animation

JB_SGGW — Mon, 19 Jul 2021 05:55:07 GMT

Hello

I am new to the forum and newbie in Fusion.

I created two simple models of a cam mechanizm. But the problem occurred when I tried to animate them. One model Cam_1 worked perfectly, but the second one Cam_2 didn't.

Have you any idea what I did wrong?

Re: Contact set model animation

davebYYPCU — Mon, 19 Jul 2021 10:57:43 GMT

Can't see much difference between them, slider joints are on differing faces,

but this is a good demo of contact set reliability, or not.

Might help....

Re: Contact set model animation

JB_SGGW — Mon, 19 Jul 2021 16:28:10 GMT

Thanks for replay.

If on your computer animations work well that means the problem could be with my computer or internet connection or both.

Re: Contact set model animation

jhackney1972 — Mon, 19 Jul 2021 16:35:41 GMT

I would not judge your computer on this model. One of your assemblies works well, the other does not. I am using a very old computer and by no means do I judge the performance of it on a Fusion 360 Contact Set. They can be very unpredictable. By the way, sometimes the sequence you apply your joints will determine if the Contact Set works or not.

Re: Contact set model animation

davebYYPCU — Mon, 19 Jul 2021 21:26:19 GMT

Nothing wrong with your computer, lots of contact set anomolies documented in here, avoid them if you can, but needed for this model.

Might help....

Re: Contact set model animation

JB_SGGW — Tue, 20 Jul 2021 04:18:16 GMT

Thank you for your reply and help.

Re: Contact set model animation

JB_SGGW — Tue, 20 Jul 2021 04:19:33 GMT

Thank you for help.