topic Re: Fuzzy Letters in Text Tool in Fusion Support Forum

Fuzzy Letters in Text Tool

bmsteve.au — Sun, 25 Jul 2021 11:58:45 GMT

Hi There all, Just started in F360 and have been using the text tool, when I create text it's just a fuzzy bitmap and not vectors, can't tell if it's my fault ?

Doesn't matter what font I use, the sketch is closed as well

I've done this several times also shut down the program and restarted the PC

Windows 10

Processor AMD Ryzen 9 3900XT 12-Core Processor 3.79 GHz
Installed RAM 32.0 GB
System type 64-bit operating system, x64-based processor

Thanks In Advance

...

Re: Fuzzy Letters in Text Tool

jhackney1972 — Sun, 25 Jul 2021 12:43:11 GMT

You are still in the sketch. Finish your sketch and create a feature (extrusion, revolve, etc.) and you will get your sharp model. You can also right click on the sketch text and chose Explode Text if you want vector text elements.

Re: Fuzzy Letters in Text Tool

jeff_strater — Sun, 25 Jul 2021 13:13:07 GMT

Fusion does not convert the text to vectors until needed (by Extrude, Sweep, etc). You can manually force this conversion by selecting the text in the sketch, and choosing "Explode".

Betreff: Fuzzy Letters in Text Tool

g-andresen — Sun, 25 Jul 2021 14:38:40 GMT

Hi,

take a look at the extrusion or Emboss

günther

Re: Fuzzy Letters in Text Tool

bmsteve.au — Mon, 26 Jul 2021 00:17:21 GMT

LOL, I should kick myself, so obvious when it's pointed out

This is what I was trying to do, took me 5 minutes to figure it out once I had the letter I wanted

Thanks for your quick reply's guys 🙂