topic Re: Poor Simulation Graphics in Fusion Support Forum

Poor Simulation Graphics

mbulgerDHJU5 — Mon, 26 Jul 2021 14:41:27 GMT

We just built a new work station need help with graphic settings in fusion. I posted a screen shot of current settings

and a simulated part.

Mark Bulger

Betreff: Poor Simulation Graphics

g-andresen — Mon, 26 Jul 2021 15:16:58 GMT

Hi,

@mbulgerDHJU5 schrieb:
We just built a new work station need help with graphic settings in fusion. I posted a screen shot of current settings
and a simulated part.

Missing!

günther

Betreff: Poor Simulation Graphics

mbulgerDHJU5 — Tue, 27 Jul 2021 11:51:20 GMT

The material shown with arrows , shoudn't be there, the stock is to size.

Re: Poor Simulation Graphics

seth.madore — Tue, 27 Jul 2021 12:23:43 GMT

Can you share your Fusion file? It's possible a graphical issue is present, or it's also possible that there is a CAM operation that was skipped, or programmed incorrectly.

Re: Poor Simulation Graphics

mbulgerDHJU5 — Tue, 27 Jul 2021 12:48:33 GMT

Here is the file.

Re: Poor Simulation Graphics

seth.madore — Tue, 27 Jul 2021 13:12:13 GMT

Assuming you're looking at the Simulation results from Setup 2 (1st setup), this is what I'm getting when I run the entire Setup:

Re: Poor Simulation Graphics

mbulgerDHJU5 — Tue, 27 Jul 2021 16:32:05 GMT

This is what I see after running setup#2

Re: Poor Simulation Graphics

seth.madore — Tue, 27 Jul 2021 16:36:54 GMT

Are you on Mac or PC?
This is bizarre, I'm not seeing the flaws that you are

Re: Poor Simulation Graphics

mbulgerDHJU5 — Tue, 27 Jul 2021 16:59:45 GMT

Windows PC

Re: Poor Simulation Graphics

mbulgerDHJU5 — Wed, 28 Jul 2021 18:15:45 GMT

Any further advice on what to do?

Re: Poor Simulation Graphics

seth.madore — Wed, 28 Jul 2021 18:20:33 GMT

Unfortunately, no.

Could you take a ScreenCast of your full workflow so I can rule out any other causes?