topic Re: Graphics issue warning/wrong Directx in Fusion Support Forum

Graphics issue warning/wrong Directx

Anonymous — Mon, 23 Aug 2021 21:32:06 GMT

Good day all, newbie here. Just started learning fusion360 the other day. I fired up 360 and shortly after I got a graphics warning banner.

Went to the diagnostics in help and it came back with it saying I have Directx 9. My computer has Directx 12. Anyone know why this would come up as 9 and not 12?

My computer meets and exceeds the required specs. Oh and I did a search before posting. Couldn't find anything on this topic that was new. Thank you for any help you may give

Re: Graphics issue warning/wrong Directx

jhackney1972 — Mon, 23 Aug 2021 22:19:25 GMT

Right click on your login picture/name in the upper right hand corner, choose Preferences and see what this is set to.

Re: Graphics issue warning/wrong Directx

Anonymous — Tue, 24 Aug 2021 20:02:23 GMT

Thanks for information. I'll check it out later tonight when I get home from and let you know.

Re: Graphics issue warning/wrong Directx

Anonymous — Thu, 26 Aug 2021 20:20:54 GMT

Sorry took me so long to get back. The graphics driver is set to Auto-select. Should I change it?

Re: Graphics issue warning/wrong Directx

jhackney1972 — Thu, 26 Aug 2021 23:05:28 GMT

I would give it a try, you cannot hurt anything. Since you are on Windows operating system, you can go to the Run line and enter Dxdiag and view if you system has an errors with DirectX. If you have the OpenGL Core Profile, you might even try that. One thing to be sure and do is check the box shown below. It is found under the as shown below.