topic Re: Adding a Post Processor in new Fusion 360 Interface in Fusion Support Forum

Adding a Post Processor in new Fusion 360 Interface

apostM2K9B — Thu, 26 Aug 2021 16:56:39 GMT

Had to rebuild my laptop, thus reinstall Fusion 360. Following this link https://knowledge.autodesk.com/support/fusion-360/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-add-a-Post-Processor-to-your-Personal-Posts-in-Fusion-360.html to remind me how to add a post processor for my desktop CNC. The interface for doing this has changed and the how-to has not kept pace. Any ideas how to add a post processor when your machine is not in the pre-set lists?

Re: Adding a Post Processor in new Fusion 360 Interface

jhackney1972 — Thu, 26 Aug 2021 17:00:44 GMT

This should do it for you if you have a post processor file (cps) to import.

Re: Adding a Post Processor in new Fusion 360 Interface

apostM2K9B — Thu, 26 Aug 2021 17:19:38 GMT

Bingo. I'll have to boot up the wee machine to verify, but that looks to have done the trick. Thank you.

Re: Adding a Post Processor in new Fusion 360 Interface

bguincey — Fri, 27 May 2022 14:23:53 GMT

I personally controlled to fix this via really acting a easy uninstall and reinstalling everythin again. Now I sadly have the trouble I had before: this system does indeed open up, it loads a chunk while making the model of wading boots, and then crashes earlier than its finished loading. But as a long way as licensing problems move, the ones seem to be solved.