topic Re: Cannot reach the "Post", "Ok" and "Cancel" buttons of the Post Properties process. in Fusion Support Forum

Cannot reach the "Post", "Ok" and "Cancel" buttons of the Post Properties process.

weewx02 — Sat, 28 Aug 2021 08:28:43 GMT

Even I have hidden the Task Bar, but I am still not able to press the buttons since it is over my shown screen.

Re: Cannot reach the "Post", "Ok" and "Cancel" buttons of the Post Properties process.

HughesTooling — Sat, 28 Aug 2021 08:49:22 GMT

For now I'd suggest unchecking this option in preferences and going back to the old post dialog. @seth.madore Something to look at!

Re: Cannot reach the "Post", "Ok" and "Cancel" buttons of the Post Properties process.

seth.madore — Sun, 29 Aug 2021 13:51:19 GMT

@weewx02 can you give me some info about your computer and display size? Are you running Fusion in full-screen mode, and what is your resolution? What OS are you using, and are your graphics drivers up-to-date?

Re: Cannot reach the "Post", "Ok" and "Cancel" buttons of the Post Properties process.

serge.quiblier — Tue, 31 Aug 2021 12:58:55 GMT

Hello @weewx02 , @seth.madore

If the display resolution is less than 713 in the vertical direction, it can be the issue.

The smallest size i can resize down to is X800 Y713 approximately.

This can be your issue apparently, can you confirm please.

So we can advise the developper for srinking to smaller vertical size.

Regards.

Re: Cannot reach the "Post", "Ok" and "Cancel" buttons of the Post Properties process.

serge.quiblier — Wed, 01 Sep 2021 13:30:35 GMT

Hello @HughesTooling , @weewx02

With the latest august release the Feature flag has eveolved in a different one.

Previously you have to enable NC program,

nowadays you must, request the older dialog to be used.

Latest 2.0.10813 feature flags.

Cheers

PS : Capture from Fusion v2.0.10813

______________________________________________________________

If my post answers your question, please click the "Accept Solution" button. This helps everyone find answers more quickly!

Re: Cannot reach the "Post", "Ok" and "Cancel" buttons of the Post Properties process.

serge.quiblier — Thu, 02 Sep 2021 14:54:21 GMT

Hello @weewx02

You may have a similaire issue as this guy in this thread.

It was due to scaling of his display.

so the 1080 /1.50 = 720 which is not that bigger than the dialog at 713.

Regards.

______________________________________________________________

If my post answers your question, please click the "Accept Solution" button. This helps everyone find answers more quickly!