topic Re: Cropped perspective view on change of scale in Fusion Support Forum

Cropped perspective view on change of scale

jameswVTJ5V — Thu, 28 Nov 2024 12:39:47 GMT

Hi all,

I have a perspective view in a drawing which displays fine when initially created...

However, if I change the scale it is cropped....

And ends up like this...

Any ideas why this might be a thing? It only seems to happen in the front perspective view and with this particular model.

https://a360.co/41eMnmG

TIA

Re: Cropped perspective view on change of scale

jhackney1972 — Thu, 28 Nov 2024 14:21:34 GMT

You have your Focal Length set to Narrow in your Prospective View. Change this to Wide or create a new scaled view before changing the view to Prospective View will help you out.

Re: Cropped perspective view on change of scale

jameswVTJ5V — Thu, 28 Nov 2024 14:40:20 GMT

@jhackney1972

Thank you for your reply.

Unfortunately choosing wide focal length doesn't seem to make a difference.

So this is the perspective view created at the native scale (1:50) and with wide focal length...

And this is it scaled to 1:30...

And this is the result...

Also I may be missing something, but how do I create a standard view and then change it to a perspective view?

Cheers!

Re: Cropped perspective view on change of scale

jhackney1972 — Thu, 28 Nov 2024 17:51:36 GMT

The attached video will give you are workaround to your problem. It is not a solution but will get you going.

If this gives you a solution to your question, not to the Fusion problem, please select the "Accept Solution" on my post.

(view in My Videos)