POST PROCESSOR ERROR. Parameter does not exist

martynas.rKKLK9 — Wed, 08 Sep 2021 05:53:35 GMT

Hello

When ever i am using circular strategy, my post processor gives me an error.
Anyone has any ideas what kind a issue im having?

Information: Configuration: Mazak
Information: Vendor: Mazak
Information: Posting intermediate data to 'C:\Users\martynas.r\Desktop\1001.eia'
Information: Total number of warnings: 1
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Wednesday, September 8, 2021 5:48:44 AM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.5793.0
Configuration path: C:/Users/martynas.r/AppData/Roaming/Autodesk/Fusion 360 CAM/Posts/MAZAK.cps
Security level: 1000
Include paths: C:/Users/martynas.r/AppData/Roaming/Autodesk/Fusion 360 CAM/Posts
Configuration modification date: Tuesday, August 24, 2021 1:27:13 PM
Output path: C:\Users\martynas.r\Desktop\1001.eia
Checksum of intermediate NC data: 9f87c47654d24d7312a56f781cb5c810
Checksum of configuration: eebda69a0a176a612003b27b8cdf69e2
Vendor url: http://www.autodesk.com
Legal: Copyright (C) 2012-2021 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.10813
...
Warning: Work offset has not been specified. Using G54 as WCS.

###############################################################################
Error: Error: Parameter does not exist.
Error at line: 1
Error in operation: 'Circular1'

Stack dump:
("Parameter does not exist.")@:0
initializeSmoothing()@C:/Users/martynas.r/AppData/Roaming/Autodesk/Fusion 360 CAM/Posts/MAZAK.cps:662
onSection()@C:/Users/martynas.r/AppData/Roaming/Autodesk/Fusion 360 CAM/Posts/MAZAK.cps:1036
Failed while processing onSection() for record 7747.
###############################################################################

Error: Failed to invoke function 'onSection'.
Error: Failed to invoke 'onSection' in the post configuration.
Error: Failed to execute configuration.
Stop time: Wednesday, September 8, 2021 5:48:44 AM
Post processing failed.

Re: POST PROCESSOR ERROR. Parameter does not exist

seth.madore — Wed, 08 Sep 2021 09:56:16 GMT

Huh, odd. Can you share the Fusion file and the post processor here?

Re: POST PROCESSOR ERROR. Parameter does not exist

martynas.rKKLK9 — Wed, 08 Sep 2021 10:17:14 GMT

Both of the ppost gives me the same result, btw it has a lot of modifications, maybe thats the problem?

topic Re: POST PROCESSOR ERROR. Parameter does not exist in Fusion Support Forum

POST PROCESSOR ERROR. Parameter does not exist

Re: POST PROCESSOR ERROR. Parameter does not exist

Re: POST PROCESSOR ERROR. Parameter does not exist