topic Re: 2d Drawing, Custom line width does not work. in Fusion Support Forum

2d Drawing, Custom line width does not work.

HughesTooling — Sat, 02 Oct 2021 17:57:48 GMT

If I use the built in options, line widths display correctly but the custom option has no affect over the last built in setting.

Below I saved as Very thick to demonstrate, then used custom settings but they have no affect.

Mark

Re: 2d Drawing, Custom line width does not work.

Pramod.kadam — Mon, 04 Oct 2021 03:34:32 GMT

Hi Mark,

Sorry to hear that you are facing an issue. Can you please help me to understand few scenarios?

Once you set the line width to the custom value, did you try changing the zoom level so as to confirm line widths value are not getting reflected?
Does this happen with all files or only with this file?
Is this file created on different locale than English?
If possible, please share the file over email - pramod.kadam@autodesk.com

Thanks,

Re: 2d Drawing, Custom line width does not work.

HughesTooling — Mon, 04 Oct 2021 19:07:43 GMT

@Pramod.kadam Just done a bit of testing and it seems to only be a problem on a drawing using a custom imported title block. I'll see if I can come up with something I can share that has the same problem.

Mark

Re: 2d Drawing, Custom line width does not work.

nemadec — Tue, 05 Oct 2021 09:11:47 GMT

@HughesTooling

we tried the workflow which you suggested, it is working fine (refer video).

please revert back if you are referring to any other workflow.

One more suggestion, you can try following things

1. Try Zoom-in/Out after changing the line width, see weather you are able to see the changes or not?

2. Try exporting to dwg and see the actual line width in AutoCAD

If all above mention workflows doesn't work, than it would be great if you can share file with us.

Re: 2d Drawing, Custom line width does not work.

HughesTooling — Tue, 05 Oct 2021 09:27:37 GMT

As I said it works perfectly with the standard templates that come with Fusion. The problem template has a title block I imported as a DWG, the standard line width groups work but custom has no affect. I've tried saving to PDF as that's what my customer would need and the line widths are wrong there as well. See screencast.

Mark

Re: 2d Drawing, Custom line width does not work.

nemadec — Tue, 05 Oct 2021 10:32:24 GMT

@HughesTooling

Thanks for confirmation,

Can you share this file or title block which you used for this.

Re: 2d Drawing, Custom line width does not work.

HughesTooling — Fri, 08 Oct 2021 14:49:41 GMT

I've tried to recreate this in another file but it is not repeatable. Link to a copy of the 2d drawing that has the problem.

https://a360.co/3uRPizP

Mark