topic Re: Fusion won't update and bodies do not show in Manufacture Workspace in Fusion Support Forum

Fusion won't update and bodies do not show in Manufacture Workspace

micheloudeg — Mon, 04 Oct 2021 11:44:51 GMT

I get the message "You are on a version of Fusion 360 where live update is not working. Please follow article below to update to the latest version." even after reinstalling Fusion 360 from scratch as indicated in the help article. I have now in the About the following details: 2.0.11186 / Active Plan: Fusion 360, Personal / Windows 10 (19042)

This lack of update is probably the source of the problem I have today, in the Manufacture workspace Bodies from some components will not show at all. Those components or bodies created until yesterday show up fine, any new component do not show at all. Just new sketches. I read the two articles about this particular topic and yes all eyes are set to visible in the object menu.

Any ideas?

Re: Fusion won't update and bodies do not show in Manufacture Workspace

HughesTooling — Mon, 04 Oct 2021 13:14:00 GMT

If you right click the folder under Models there's an option to Show All Components and Show All Bodies that might help. Only other though is is the timeline maker at the end of the timeline when you changed to the manufacture workspace?

Mark

Re: Fusion won't update and bodies do not show in Manufacture Workspace

micheloudeg — Mon, 04 Oct 2021 13:16:27 GMT

Thanks a lot I will try this. Now I did a clean uninstall and am
reinstalling (for the not updating part of my problem). Will report back.

Re: Fusion won't update and bodies do not show in Manufacture Workspace

micheloudeg — Mon, 04 Oct 2021 13:20:14 GMT

All right both issues solved.

1) Not updating. I did a clean uninstall then reinstalled and it worked.

2) Bodies not showing due to me being a complete moron somewhow a Section Analysis view was turned on and hiding half of my design.

Thanks again for your kind help.

Re: Fusion won't update and bodies do not show in Manufacture Workspace

micheloudeg — Mon, 04 Oct 2021 17:55:14 GMT

Actually now a couple hours later issue 1 Not updating appears again in the Notifications....

You are on a version of Fusion 360 where live update is not working. Please follow article below to update to the latest version.