Edit joints from the timeline

stevewood49 — Mon, 09 Dec 2024 03:18:48 GMT

Hi, I'm new to posting on forums, usually I find the answers that I need online, however I have come across a problem.

When I create a join between components I can create an offset, this really helps with parametric designs.

Unfortunately if I want to go back on the timeline and edit an existing joint it does not give me the chance to create any offsets. I think the image below shows the issue.

I made the joint with no offset but want to change this without disrupting the rest of the model if possible.

Does anyone know if there is a reason for preventing this. When I deselect the components and try to re-select them 1 of the components originally in the joint is greyed out and can't be selected.

The file can be found here if needed: StepLadderV1-v14.f3d or attached with this post

I went through a big learning curve on this project just because I wanted to use parametric design and to utilise the BOM type features to create part drawings automatically.

Thanks,

Steve

Re: Edit joints from the timeline

davebYYPCU — Mon, 09 Dec 2024 03:45:43 GMT

As Built Joints, don't allow offsets, you need to replace it with a normal Joint, for that functionality.

Might help...

Betreff: Edit joints from the timeline

g-andresen — Mon, 09 Dec 2024 11:47:02 GMT

Hi,

create joint and edit in timeline

(view in My Videos)

günther

topic Edit joints from the timeline in Fusion Support Forum

Edit joints from the timeline

Re: Edit joints from the timeline

Betreff: Edit joints from the timeline