topic Re: Components hanging vertically in Fusion Support Forum

Components hanging vertically

spudym — Thu, 11 Nov 2021 06:30:11 GMT

I might be asking for the impossible here.

I would like to animate a set of weighing scales.

I have a joint for the arm and joints on both ends of the link.

When the arm is tilted I would like the bowl to stay vertical, is this even possible.

Re: Components hanging vertically

davebYYPCU — Thu, 11 Nov 2021 09:19:37 GMT

You can do that with Assemble > Motion Link.

Select the the 2 joints, enter a ratio value 1 to -1 or 360 to -360

Set the minus sign to the respective joint as required.

3 joints - 2 Motion Links.

Might help....

Re: Components hanging vertically

spudym — Thu, 11 Nov 2021 21:35:54 GMT

Awesome, Thank you so much.

Re: Components hanging vertically

spudym — Wed, 17 Nov 2021 05:09:36 GMT

Thank you for your help, could I impose and ask if you have any thoughts on how to make it work in the animation space. I can get the arm and bowls to move but yet again the bowls joints are locked. even though they behave correctly in modeling space.

Thanks Matt

Re: Components hanging vertically

davebYYPCU — Wed, 17 Nov 2021 05:17:17 GMT

Select the joints.

Along the timeline - set the sweep angle - for each joint, timing will be identical, values used in the Design space will have to be converted.

Might help....

Re: Components hanging vertically

spudym — Fri, 19 Nov 2021 02:53:44 GMT

Thank you for the reply but unfortunately cannot work it out.

Matt

Re: Components hanging vertically

davebYYPCU — Fri, 19 Nov 2021 03:30:05 GMT

Will need your file to check it's build.

Re: Components hanging vertically

spudym — Fri, 19 Nov 2021 03:33:56 GMT

Here it is,very embarrassing but. https://a360.co/3HxgMk2

Re: Components hanging vertically

davebYYPCU — Fri, 19 Nov 2021 08:31:16 GMT

Do you mean -

Animate Model from the Joint right click menu, (works)

Motion Study from the Assembly Menu, (use + / - 35 degrees)

or the Animation Workspace? (For movie export)