topic Re: Tool Paths from other project are visible in Fusion Support Forum

Tool Paths from other project are visible

Ryan_Fab — Tue, 23 Nov 2021 13:49:15 GMT

Just thought I'd report something I've seen a couple of times recently.

In the image below the tool path visible doesn't actually belong to this project. It belongs to one I have open on another tab. Anyone else seen this?

Re: Tool Paths from other project are visible

seth.madore — Tue, 23 Nov 2021 14:03:46 GMT

I've seen some reports of this, but haven't actually encountered this myself. Are your graphic drivers up to date?

Re: Tool Paths from other project are visible

dcolley_ptfnola — Tue, 23 Nov 2021 14:13:03 GMT

I've seen this too. Make sure you open the other setups and turn OFF any other tool paths.

Re: Tool Paths from other project are visible

Ryan_Fab — Tue, 23 Nov 2021 14:21:03 GMT

Hi Seth, just checked and Im all up to date

Re: Tool Paths from other project are visible

Ryan_Fab — Tue, 23 Nov 2021 14:26:38 GMT

Hi David, that's not the issue for me. When I say another tab I don't mean from a different manufacturing op in the setup tree, I mean from a completely different job that is open in the background.

The odd thing was that the toolpath it was showing didn't even have the visibility turned on its own project, its a weird one.

Re: Tool Paths from other project are visible

dcolley_ptfnola — Tue, 23 Nov 2021 14:28:02 GMT

Whoa! That is wierd. Have you figured it out?

Re: Tool Paths from other project are visible

Ryan_Fab — Tue, 23 Nov 2021 14:36:32 GMT

Restart the software fixes it. Which I don't like doing, as it gives someone an opportunity to distract me! 😂