topic Betreff: Extruding parts of bodies to a point in Fusion Support Forum

Extruding parts of bodies to a point

larsljungberg83 — Mon, 20 Dec 2021 20:35:54 GMT

Hi!

I am trying to modify these two bodies so that they meet at the two point axis. The goal is to create a box of sorts. Any help would be greatly appreciated.

Happy Yule!

Betreff: Extruding parts of bodies to a point

g-andresen — Mon, 20 Dec 2021 20:49:46 GMT

Hi,

please share the file

File > Export save as f3d on local drive > attach to next post

günther

Betreff: Extruding parts of bodies to a point

larsljungberg83 — Mon, 20 Dec 2021 21:38:05 GMT

Sure. Here goes.

Betreff: Extruding parts of bodies to a point

jhackney1972 — Mon, 20 Dec 2021 21:50:47 GMT

When you miter the corner, as you indicated, the existing cuts do not render a very acceptable corner. The material is not available to create a nice miter. Easy to fix but I do not know what result you desire. Showing one corner below.

Betreff: Extruding parts of bodies to a point

larsljungberg83 — Mon, 20 Dec 2021 21:58:32 GMT

Cheers for your input. So it is the miter tool i am supposed to use, thanks for that.

See the attached file for refernce.

Betreff: Extruding parts of bodies to a point

jhackney1972 — Mon, 20 Dec 2021 22:05:53 GMT

You model is composed of Direct Modeled sides, no sketches to modify the lengths to get a clean miter. I used the Press-Pull command to extend the two side to allow for a clean miter. Model is attached as a single file, no External links. There is no Miter Tool in Fusion 360.

Betreff: Extruding parts of bodies to a point

larsljungberg83 — Mon, 20 Dec 2021 22:25:01 GMT

That is exactly what I was looking for! I'll try to figure out what u did by looking at the history.
Thanks for your help!

Betreff: Extruding parts of bodies to a point

jhackney1972 — Mon, 20 Dec 2021 22:30:54 GMT

Please note. You have External files in your assembly so they have to be modified outside the Assembly before mitering them in the Assembly. Even if you have a Fusion 360 Subscription License, Edit in Place function does not work on Bodies.