topic Re: Unable to get extrude to work on edited sketch in Fusion Support Forum

Unable to get extrude to work on edited sketch

wo009b0742 — Sun, 16 Jan 2022 11:02:33 GMT

I have created a sketch which is very basic. I've created a circle with other circles in it to hold magnets. I have went back to edit the design to add more holes but when I finish sketch the new holes are not extruding. Any help would be very welcome. I'm using the personal use one.

Re: Unable to get extrude to work on edited sketch

davebYYPCU — Sun, 16 Jan 2022 11:05:08 GMT

Editing the sketch is not enough,

you then have to edit the extrude feature and add more profile selections in the dialogue.

Might help...

Re: Unable to get extrude to work on edited sketch

wo009b0742 — Sun, 16 Jan 2022 11:09:19 GMT

I'm new to this, How would I edit the extrude Feature? thanks for the help.

Re: Unable to get extrude to work on edited sketch

davebYYPCU — Sun, 16 Jan 2022 11:21:05 GMT

Select the correct Extrude icon on the timeline, right click for the Menu, and in the Menu is Edit Feature, select that.

Make sure the Profiles selected is highlighted blue,

then select more "Circles" from the sketch, and the count in the dialogue will increase as you do so,

other detail in the dialogue can be changed if required, at the same time.

Might help...