https://forums.autodesk.com/t5/fusion-support-forum/sketch-reuse/m-p/10891545#M64963 <P>there is no other way to do this that I can think of outside of creating a separate external design, and inserting it multiple times.</P> Wed, 19 Jan 2022 19:41:03 GMT jeff_strater 2022-01-19T19:41:03Z https://forums.autodesk.com/t5/fusion-support-forum/sketch-reuse/m-p/10891522#M64962 <P>I am trying to design some basic structure using a simple L-profile that later might be changed into a simple square tube profile or some other more complex aluminum extrusion profile. I am trying to have one sketch and with multiple extrusions. Each extrusion will be moved and rotated around and may differ in length.&nbsp; If I change the single reference sketch all derived bodies should be updated too. But I do not get it to work. I can do exactly one extrusion for a single sketch. After that the extrusion dialog window on the used sketch does not let me specify a extrusion length and the visual interface is also gone!&nbsp;</P><P>&nbsp;</P><P>Exporting the profile into a separate assembly file and the importing it as assembly works, but it seems to be overkill to create a single assembly file for just one sketch. Is there any simpler way to make this work?</P> Wed, 19 Jan 2022 19:33:11 GMT https://forums.autodesk.com/t5/fusion-support-forum/sketch-reuse/m-p/10891522#M64962 eike.scholz 2022-01-19T19:33:11Z https://forums.autodesk.com/t5/fusion-support-forum/sketch-reuse/m-p/10891545#M64963 <P>there is no other way to do this that I can think of outside of creating a separate external design, and inserting it multiple times.</P> Wed, 19 Jan 2022 19:41:03 GMT https://forums.autodesk.com/t5/fusion-support-forum/sketch-reuse/m-p/10891545#M64963 jeff_strater 2022-01-19T19:41:03Z