https://forums.autodesk.com/t5/fusion-support-forum/construction-lines/m-p/13214646#M6491 <P>See if this file helps you out.&nbsp; Model is attached.</P> Mon, 16 Dec 2024 20:41:01 GMT jhackney1972 2024-12-16T20:41:01Z https://forums.autodesk.com/t5/fusion-support-forum/construction-lines/m-p/13214488#M6490 <P>I have designed a simple wooden coaster to be made on a CNC machine i. This means the workpiece needs to be flipped after the first 7 grooves are milled. My plan is to use a 2D pocket operation.</P><P>The issue/problem is that the outer grooves cannot be milled using the 2D pocket operation or others.</P><P>My assumption is that this might be because the design lines in the sketch are not properly connected? (marked with a red circle)</P><P>The file is also attached. Can anyone help?</P><P>Thanks in advance,</P><P>Thomas J.</P> Mon, 16 Dec 2024 19:30:50 GMT https://forums.autodesk.com/t5/fusion-support-forum/construction-lines/m-p/13214488#M6490 thomasjeppesen 2024-12-16T19:30:50Z https://forums.autodesk.com/t5/fusion-support-forum/construction-lines/m-p/13214646#M6491 <P>See if this file helps you out.&nbsp; Model is attached.</P> Mon, 16 Dec 2024 20:41:01 GMT https://forums.autodesk.com/t5/fusion-support-forum/construction-lines/m-p/13214646#M6491 jhackney1972 2024-12-16T20:41:01Z https://forums.autodesk.com/t5/fusion-support-forum/construction-lines/m-p/13215203#M6492 <P>Thank you very much.</P><P>-Geomotry closed chain and heights, bottom heights form face.</P><P>&nbsp;</P><P>&nbsp;</P> Tue, 17 Dec 2024 05:32:50 GMT https://forums.autodesk.com/t5/fusion-support-forum/construction-lines/m-p/13215203#M6492 thomasjeppesen 2024-12-17T05:32:50Z