topic Re: BUG - Rectangular pattern issues with surfaces in Fusion Support Forum

BUG - Rectangular pattern issues with surfaces

carl.j.barker — Fri, 11 Feb 2022 11:29:48 GMT

Errors and crashes using rectangular pattern on a surface.

To replicate :-

sketch circle and extrude a surface cylinder.

on a tangent plane sketch and extrude a hole through the side of the cylinder.

Use rectangular pattern, -> feature. Pick the extrude for the hole, then choose an origin axis for direction. Tool stops working correctly.

If you then fill in the rest of the pattern dialogue and ok it. nothing happens, but editing the pattern crashes fusion.

There is a work around by choosing to pattern a body, then changing to feature after everything is entered into the dialogue.

Betreff: BUG - Rectangular pattern issues with surfaces

g-andresen — Fri, 11 Feb 2022 13:35:09 GMT

Hi,

please demonstrate the process in a screencast

günther

Re: BUG - Rectangular pattern issues with surfaces

jeff_strater — Fri, 11 Feb 2022 19:04:21 GMT

I was not completely sure what workflow you were describing, so I had to guess. I made a surface extrude, then a solid extrude to do the hole. I was able to pattern that solid cut OK. If this is not what you were doing, please show a screencast or share the model up to the pattern point.

Re: BUG - Rectangular pattern issues with surfaces

TrippyLighting — Fri, 11 Feb 2022 19:40:50 GMT

@jeff_strater I can reproduce it with a rectangular pattern. A circular pattern works 😉

Re: BUG - Rectangular pattern issues with surfaces

jeff_strater — Fri, 11 Feb 2022 19:47:35 GMT

ah, OK, my apologies. A problem with reading comprehension... I just assumed that this was a circular pattern. Will investigate with rectangular pattern...

Re: BUG - Rectangular pattern issues with surfaces

jeff_strater — Fri, 11 Feb 2022 22:25:38 GMT

OK, now that I actually read the original post, I can reproduce it, as well. I created FUS-98941 for this issue.