topic Re: TURNING PROFILE Error: Internal CAM kernel error in Fusion Support Forum

TURNING PROFILE Error: Internal CAM kernel error

smcdonald_76 — Mon, 14 Feb 2022 20:02:09 GMT

Both Turning profile Roughing & Finishing throw an error

"Error: Internal CAM kernel error. Please report through your support channel."

I tried I.D> & O.D.

I tried different tools.

I even opened a previously working program and tried to create a new profile.

Seems this command is juts plain broken.

earlier newly created folders were giving me read errors for an hour then magically just started working again.

Anyone else having this problem today?

Maybe it will work tomorrow?

Re: TURNING PROFILE Error: Internal CAM kernel error

seth.madore — Mon, 14 Feb 2022 20:26:29 GMT

Can you share a Fusion file that is doing this?
Is this all happening on the same computer?
Are you using Windows 7 or 10?

Re: TURNING PROFILE Error: Internal CAM kernel error

smcdonald_76 — Mon, 14 Feb 2022 20:42:39 GMT

I found the problem was using windows 7.

I replaced the camkernel.dll file as described in the "Manufacturing Workspace Issues in Windows 7" article here and that fixed it

THANKS for the quick reply!

Re: TURNING PROFILE Error: Internal CAM kernel error

patl1 — Mon, 18 Jul 2022 23:05:37 GMT

I am having this problem on a model in a profile turning roughing toolpath. The same file posted just fine a month ago. I screwed around with it and made it work by changing the remaining material from .004" to .002". this of course is not what I want for remaining material and makes no logical sense that it corrected the error on a toolpath that used to run fine. I am using window 11.