topic Re: Double Projected Geometry on First Try in Fusion Support Forum

Double Projected Geometry on First Try

sewais — Mon, 30 Dec 2024 18:25:33 GMT

Greetings,

I've noticed this happening multiple times, & can almost replicate it as needed. When ever sketching & selecting the PROJECT feature, then selecting a face, the geometry generated is doubled up on top of itself. This is extremely irritating as deleting or 'breaking links' just doesn't do anything sometimes.

Any one else experiencing the same thing?

Re: Double Projected Geometry on First Try

davebYYPCU — Mon, 30 Dec 2024 20:10:12 GMT

You have that behaviour because the face is projected on selection of the face.

It a preference setting. Start over, after selecting a face to put the sketch on, hide the body, you will have projected the face, but the purple outlines are not showing un5il you mouse over the boundaries.

Either turn off the preference setting, or don’t Project the face manually.

Might help….

Re: Double Projected Geometry on First Try

sewais — Mon, 30 Dec 2024 20:32:50 GMT

Hi Dave,

Can you give an example? Or show where this preference setting is?

I need to project some geometry from the face & tie it into geometry that I offset.

This only happens on the first extract. Once I delete all the projected geometry, & try again, it works as intended.

Re: Double Projected Geometry on First Try

davebYYPCU — Mon, 30 Dec 2024 21:43:43 GMT

Preferences, check for Auto project on reference, or similar,

or are you looking for the preferences.

In the movie second time round the sketch exists,

Repeatable for when creating new sketch, on a selected face, until you turn off that Preference.

Might help….

Re: Double Projected Geometry on First Try

sewais — Mon, 30 Dec 2024 22:46:02 GMT

Dave,

I found it. Thank you for your help.

Re: Double Projected Geometry on First Try

jhackney1972 — Tue, 31 Dec 2024 01:46:40 GMT

I want to bring something to your attention. When responding to a post from someone, do not use the "Post Reply" icon as this will address your post to yourself. Instead use the "Reply" icon on the post you are responding to address your post to that person. Look back at the messages in this post and you will see what I mean.