topic Re: Error: Failed coilfunction for knurling. in Fusion Support Forum

Error: Failed coilfunction for knurling.

jorbakken — Wed, 01 Jan 2025 10:54:22 GMT

Hi.

Happy new year everybody.

I`m trying to make a knurly pattern on a knob using the coil-function, but I get an error-message either by making the first half revolution or by mirroring it.

I get two different errormessages. Either:

or when I finally get a line and try to mirror it;

I`ve tried to change patterns upwards and downwards. Making a new "target body" to see if I`ve done something wrong with the first object. Searching and speculating for answers. I`ve seen several videoes on youtube and it looks like this should be a easy thing to manage.

Does anyone know if I`m doing something completely wrong or if it`s a issue with the Coil-function?

Betreff: Error: Failed coilfunction for knurling.

g-andresen — Wed, 01 Jan 2025 11:46:29 GMT

Hi,

try circular pattern

(view in My Videos)

günther

Betreff: Error: Failed coilfunction for knurling.

jorbakken — Wed, 01 Jan 2025 14:07:03 GMT

Hi Günther.

My plan was to do like in the video: coil- mirror - circular pattern. The problem (like I showed in the screenshots), is the error messages I get both when I use the coil-function for cutting and the mirror-function for copying, wich means; I don`t have at base-pattern to transfer to a circular pattern. The problems occures before I get to the circular-patterns-function.

Betreff: Error: Failed coilfunction for knurling.

g-andresen — Wed, 01 Jan 2025 15:05:26 GMT

Hi,

Please share the file for reply.

File > export > save as f3d on local drive > attach to post

günther

Betreff: Error: Failed coilfunction for knurling.

jorbakken — Wed, 01 Jan 2025 16:38:25 GMT

File attached.

Betreff: Error: Failed coilfunction for knurling.

g-andresen — Wed, 01 Jan 2025 17:28:41 GMT

Hi,

Watch the screencast and play with the coil data, especially the coil height.

(view in My Videos)

Pay attention to warnings!

günther

Betreff: Error: Failed coilfunction for knurling.

jorbakken — Wed, 01 Jan 2025 18:27:31 GMT

Thanks for taking the time making the video.

I tried doing it exactly like you did, but I still get the error-message:

As you can see the sketch is a bit shifted compared to the body, but like you, I just move the body in position when editing. I tried altering revolutions from 0,25 to 1 and section size 1 to 2, but it`s still the same error-message:

Re: Error: Failed coilfunction for knurling.

jorbakken — Wed, 01 Jan 2025 18:36:57 GMT

..and I also experimented with the hight.

Re: Error: Failed coilfunction for knurling.

g-andresen — Wed, 01 Jan 2025 19:20:49 GMT

Hi,

1. follow the timeline in shared file

2. start a new design

3. service utility > Repair

günther

Re: Error: Failed coilfunction for knurling.

jorbakken — Thu, 02 Jan 2025 18:37:22 GMT

Hi.

I tried the repair-function. That was a good suggestion, but it`s still the same:

Maybe I should try to delete Fusion and reinstall it? I don`t know. I`ve been going at this for weeks now... I just can`t wrap my mind around what the problem might be.

Re: Error: Failed coilfunction for knurling.

g-andresen — Thu, 02 Jan 2025 18:58:38 GMT

Hi,

1.Does my file contain the result shown in the screencast?

2. please share the latest version

günther

Re: Error: Failed coilfunction for knurling.

jorbakken — Thu, 02 Jan 2025 21:13:59 GMT

Hi.

1. Yes

2. Latest version below.

Re: Error: Failed coilfunction for knurling.

g-andresen — Fri, 03 Jan 2025 12:49:25 GMT

Hi,

In the screencast, I show you how to remove “distracting” areas and mirror profiles on a previously defined plane.

(view in My Videos)

günther

Re: Error: Failed coilfunction for knurling.

jorbakken — Sun, 05 Jan 2025 16:14:13 GMT

Hi.

I managed to get the knurling stick to the cylinder when I did as in your latest screencast. I guess I made a mistake by doing something to the sketch for the knob in the original drawing, cause when I see turtorials it`s so plain and easy to get the knurling stick to the body. I`ve got me some knurling and that`s way better than getting nothing at all! Maybe I`ll just start all over again cause I struggle to see the mistake and repair it. I still got some error-messages, but now I got something to work with.

If I recreate the sketch for the body.... I will for sure mess up elements in the timeline, but if I can restore a correct sketch it might fall back in place? Do you know if that`s doable?

-Jørgen-

Re: Error: Failed coilfunction for knurling.

g-andresen — Sun, 05 Jan 2025 16:48:53 GMT

Hi,

In such cases, it is usually better to start from scratch.
That way you have a clean basis and can prevent “damaged” features from being the cause of the error.

günther

Re: Error: Failed coilfunction for knurling.

jorbakken — Mon, 06 Jan 2025 18:55:35 GMT

Hi.

I started all over again and used some of the know-how you shared. The test on the picture doesn`t have the perfect surface, but as a knurling-test it came out just as I wanted it. A threaded crank-holder connected to a three-way gear.

Thank you for your help and patience!

-Jørgen-

Threaded crank-holder on a three-way-gear.