topic Re: using the mirror command to other faces in Fusion Support Forum

using the mirror command to other faces

MakeandCreate — Sun, 17 Apr 2022 23:07:13 GMT

I am trying to mirror a feature to a other face to the side shown in the picture below. I was able to mirror the face the front face in the picture to its opposite side but now I cant get it to mirror the feature to the left.

After that I will also Like to mirror the left face onto the opposite side of he the model and the right back face.

Re: using the mirror command to other faces

jhackney1972 — Sun, 17 Apr 2022 23:32:49 GMT

Please attach your model so the Forum users can demonstrate possible techniques on your work, then it will mean more to you. If you do not know how to attach your Fusion 360 model follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save as a F3D or F3Z file to your hard drive. Then use the Attachments section of a forum post to attach it.

Re: using the mirror command to other faces

jhackney1972 — Sun, 17 Apr 2022 23:51:20 GMT

Since you have not attached your model, I thought I would give you a small demonstration on a quick model I created on what you can do. Please attach your model for complete help on a model relative to your work.

File

MakeandCreate — Mon, 18 Apr 2022 15:27:13 GMT

This is the file I am trying to mirror the sides like the picture shows

Re: using the mirror command to other faces

MakeandCreate — Mon, 18 Apr 2022 15:42:44 GMT

Thank you so much for the help