topic Re: Help with emboss : Error: Emboss result falls outside boundary of selected faces. in Fusion Support Forum

Help with emboss : Error: Emboss result falls outside boundary of selected faces.

ivan.t.panchev — Sun, 08 May 2022 16:23:48 GMT

Hello

I am very new to Fusion 360 and this is probably a really dumb question and I apologize in advance if the solution is obvious.

I have being trying to emboss a bracelet, but I keep getting this error:

Error: Emboss result falls outside boundary of selected faces. Add adjacent faces to selection, adjust distance and rotation angle, or adjust proximity of sketch profiles to selected faces.

I have both sketches on the same plane, but either I get this error or the emboss happens on the top face, but I am selecting the front face.

The bracelet is made by revolving a 20mm x 4mm rectangular around the Z axis.

Any help will be appreciated! 🙂

Betreff: Help with emboss : Error: Emboss result falls outside boundary of selected faces.

g-andresen — Sun, 08 May 2022 20:06:42 GMT

Hi,

Please share the file.

File > export > save as f3d on local drive > attach it to the next post

günther

Re: Help with emboss : Error: Emboss result falls outside boundary of selected faces.

jhackney1972 — Sun, 08 May 2022 21:51:19 GMT

The Sketch, of the design you want to Emboss MUST be in-line with the surface you are trying to Emboss. From your screen capture it seems the emboss sketch is way above the ring surface. The Screencast will explain it better.

Re: Help with emboss : Error: Emboss result falls outside boundary of selected faces.

ivan.t.panchev — Mon, 09 May 2022 01:00:05 GMT

Oh my God, this makes so much sense, but yet I thought the emboss would be projected no matter its position.

Thank you very much!

Re: Help with emboss : Error: Emboss result falls outside boundary of selected faces.

madeforchoux — Thu, 24 Aug 2023 03:14:31 GMT

This video was very helpful! I didn't realize I had the items misaligned