topic Re: project part dimensions in drawing in Fusion Support Forum

project part dimensions in drawing

bowes.ron — Sat, 14 May 2022 15:52:05 GMT

How do I project the dimensions from a 3D part automatically into a 2D drawing? Since the 3D part is already dimensioned, I don't want to have to manually duplicate the dimensions in the 2D drawing.

With most other parametric CAD programs, you can right-click on the view and select Project Dimensions (or similar workflow).

In the 3D part, I've turned on the sketch dimensions (so I can see them outside of sketch mode). I then turned on the visibility for the sketches in the 2D drawing, but they never show.

Re: project part dimensions in drawing

jhackney1972 — Sat, 14 May 2022 15:56:45 GMT

Currently the ability to retrieve model dimensions is not available in Fusion 360.

Betreff: project part dimensions in drawing

g-andresen — Sat, 14 May 2022 15:58:51 GMT

Hi,

1. In the drawing no dimensions are taken from sketches, they must be created separately.
2. the visibility of sketches in the drawing mode concerns only solid lines.

günther

Re: project part dimensions in drawing

bowes.ron — Sat, 14 May 2022 16:37:01 GMT

Unfortunately, that is what I was afraid of... 😞

But thanks for the quick reply!