topic Re: component disappearing - bug, or?... in Fusion Support Forum

component disappearing - bug, or?...

samlino — Sat, 16 Jul 2022 02:38:51 GMT

I'm designing an enclosure with 2 components, bottom and top (cover). I designed the top first, then the bottom. After a restart of Fusion 360 the top has disappeared. Timeline marker is at the end. All I can see when I activate the top component are the 2 planes used for that component. Scrubbing through the timeline just shows the planes as well. Restart of Fusion 360 and computer do not help the issue. I am new to Fusion so it could be something I am doing. Thanks!

-Sam

Re: component disappearing - bug, or?...

davebYYPCU — Sat, 16 Jul 2022 02:51:40 GMT

Press the down arrow for Top cover,

turn on eyeballs for all items in that list.

Press the down arrow for Bottom cover,

turn on eyeballs for all items in that list.

That done, delete the Section Analysis.

Might help.....

Re: component disappearing - bug, or?...

jeff_strater — Sat, 16 Jul 2022 03:07:10 GMT

if you share the design, we can take a look at it. It is probably one of the things that @davebYYPCU listed, but we can take a look to be sure.

Re: component disappearing - bug, or?...

samlino — Sat, 16 Jul 2022 03:11:39 GMT

Well don't I feel dumb, I had turned off bodies. Thank you Thank you!