topic Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF in Fusion Support Forum

Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

chrisr — Tue, 19 Jul 2022 21:45:49 GMT

I am trying to find a way to get a post processor for a CR Onsrud 122S18 Router with a Fanuc 0i-MF controller. We have been using Vetric V-Carve pro and have a post processor that works. So far I have not been able to get the generic Fanuc post processor to work. It would be great our company to switch over to Fusion, I use it personally on a milling machine, but I need to sort out the post processor. Any help or advise would be greatly appreciated.

Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

nick.narzinski — Tue, 19 Jul 2022 22:19:45 GMT

i would try this one https://cam.autodesk.com/hsmposts?p=cr_onsrud_fanuc_31i

Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

hollshwanderc — Tue, 19 Jul 2022 22:37:55 GMT

Hello Chris,

As Nick mentioned, using the Onsrud Fanuc 31i post processor will give you the results you are looking for to post code for your machine. This is a 5 axis post processor, but will also generate 3 axis code, too. I worked with some guys in one of our other shops about a year or so ago after they purchased an M Series machine from Onsrud. Their machine is 3 axis. Is yours 3 or 5 axis? If it is a 3 axis machine then you will need to set the parameters in the post to be as follows: Has 5 axis = No(Setting in Properties)/False(Set in Post) and Force IJK Yes/True. But if it is 5 axis then the code should run without issues.

Hope this helps.

Chris H.

Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

chrisr — Wed, 20 Jul 2022 13:21:21 GMT

Thank you I will give it a try.

Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

chrisr — Wed, 20 Jul 2022 13:22:26 GMT

Thank you for the information! Will update after.

Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

chrisr — Wed, 20 Jul 2022 16:53:50 GMT

Thanks again for the help! Up and running after a few minor adjustments.

Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

hollshwanderc — Wed, 20 Jul 2022 23:46:55 GMT

Glad things worked out for you.

Chris H.

Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

matthewaarondesign — Tue, 02 Jul 2024 15:39:33 GMT

Hey I know this is 2 years later, but what adjustments did you have to make for this post processor to work? I am tasked with finding or writing a post processor for Fusion so my company can utilizes their 3-Axis CR Onsrud M-Series with a Fanuc 0i-Pendant controller.

Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

hollshwanderc — Tue, 02 Jul 2024 23:50:48 GMT

If you make the suggested changes when posting your operation files, as what I mentioned in the response from 2 years ago you should be able to use that post processor without issue. But if you prefer, you can send me a private message with your email contact info and I can get in touch with my colleagues that are running the post with their M Series machine. I can get a copy of it from them and also put you in touch with them, in case you have issues. We have a G Series machine with an Osai control in our office. When we were doing the testing I worked directly with CR Onsrud and the Fusion team to make the necessary tweaks needed to make their machine run properly with the output G-Code.

Chris

Re: Looking for a Post Processor for a CR Onsrud Router with a Fanuc 0i-MF

matthewaarondesign — Wed, 03 Jul 2024 15:13:39 GMT

Dm'd.

Thanks so much!

-Matthew