topic Re: Please separate Zoom Window and Fit buttons in Fusion Support Forum

Please separate Zoom Window and Fit buttons

cad9NZRQ — Thu, 16 Jan 2025 11:40:05 GMT

I can see that this has been asked some years ago, but did not get community support. So please please support this request fellow Fusion users so it can be implemented.

If you do not have a super duper mouse and need to use the Zoom Window or Fit buttons, you need to switch between the two repeatedly on the drop down button. There seems to be plenty of space on the menubar to separate them.

Please can these buttons be separated to prevent extra clicks.

My usage case is as follows (Sometimes on laptop trackpad):

Step 1 is to Fit - so I can see the entire window.

Step 2 is to Zoom Window to magnify the area of interest.

This process is repeated over and over again throughout the lifecycle of a design. It is simply much harder and slower than it needs to be. I believe this is a relatively quick and simple software update.

Thanks in advance to those who give this the thumbs up 🙂

P.S. I am aware that you can use 'S' to bring up the shortcut menu, but again this is a longer process as I need to use Keyboard and then mouse.

Re: Please separate Zoom Window and Fit buttons

lance.carocci — Thu, 16 Jan 2025 20:29:50 GMT

Thanks for the request @cad9NZRQ. I will pass this feedback along and see what can be done.

Re: Please separate Zoom Window and Fit buttons

cad9NZRQ — Wed, 22 Jan 2025 22:38:15 GMT

Thank you, I appreciate that.

Re: Please separate Zoom Window and Fit buttons

cad9NZRQ — Wed, 28 Jan 2026 10:11:52 GMT

Hi, please could you advise if their is any update on this request.

Thanks

Re: Please separate Zoom Window and Fit buttons

lance.carocci — Wed, 28 Jan 2026 15:56:31 GMT

Hi @cad9NZRQ, no updates to share at this time.