topic Re: How to align a circle in a sketch along an axis ? in Fusion Support Forum

How to align a circle in a sketch along an axis ?

contactNZKMF — Sun, 07 Aug 2022 20:31:21 GMT

Hi !

I have a custom axis I created and a cube.

Is there any way to create a circle in a sketch where center is located at the intersection of the axis and an edge of the cube?

(I'm able to create a point at the intersection, but the point isn't available in sketch mode)

Thanks

Re: How to align a circle in a sketch along an axis ?

jhackney1972 — Sun, 07 Aug 2022 20:34:35 GMT

Please attach your model and a screen capture to illustrate what you have and want. If you do not know how to attach your Fusion 360 model follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save as a F3D or F3Z file to your hard drive. Then use the Attachments section, of a forum post, to attach it.

Re: How to align a circle in a sketch along an axis ?

contactNZKMF — Sun, 07 Aug 2022 20:39:42 GMT

Thanks, there is an export of my model. I'm trying to draw a circle on the top edge of the cube.

Re: How to align a circle in a sketch along an axis ?

jhackney1972 — Sun, 07 Aug 2022 20:43:17 GMT

First of all, it is not a cube. Second, there are four top edges. Third, you original post mentions something about the axis intersecting the sketch. Clarify.

Re: How to align a circle in a sketch along an axis ?

contactNZKMF — Sun, 07 Aug 2022 20:47:14 GMT

Sorry, it is a parallelipiped rectangle.

And sorry for mistake, I swapped two words, I'm trying to draw a circle whom center is at the intersection of the blue axis and the face of the "box" located on the "top" (I added a point using "Edge and plane" feature)

Re: How to align a circle in a sketch along an axis ?

jhackney1972 — Sun, 07 Aug 2022 20:52:57 GMT

Model and Screencast are attached. You are looking for the Sketch, Project command.

If this solves your issue, please close your post by clicking the Accept Solution icon on the post that solved it. If you have further questions, please ask.

Re: How to align a circle in a sketch along an axis ?

contactNZKMF — Sun, 07 Aug 2022 21:06:45 GMT

Thanks for your help !