topic Re: Snapping issue... in Fusion Support Forum

Snapping issue...

dimka21.2 — Mon, 22 Aug 2022 10:44:59 GMT

I've moved sketch from point to point and now i spanning doesn't work...

Screencast: https://youtu.be/Sz4rgTog138

Re: Snapping issue...

davebYYPCU — Mon, 22 Aug 2022 10:59:04 GMT

Turn Off,

Sketch 1, 3d Sketch, Snap to Grid, and the Grid.

Might help.....

Re: Snapping issue...

jhackney1972 — Mon, 22 Aug 2022 11:01:54 GMT

Please attach your model containing this problem sketch. Open model, select File menu, then Export and save to your hard drive. Attach it to your next post.

Re: Snapping issue...

dimka21.2 — Mon, 22 Aug 2022 11:27:28 GMT

done

Sketch 2

Re: Snapping issue...

jhackney1972 — Mon, 22 Aug 2022 11:53:27 GMT

Your sketch was on on the sketch plane. The Screencast will show this. By the way, you should begin to fully constrain your sketches to become efficient in the use of Fusion 360. Model is attached.

Re: Snapping issue...

jhackney1972 — Mon, 22 Aug 2022 13:28:41 GMT

If my solution to your Forum question gave you the information you needed, please select the Accept Solution icon on my post. If you need further help please ask.