Creating code for tapping

jmweng82 — Mon, 29 Aug 2022 11:47:53 GMT

trying to ridged tap in my chevalier fagor controller my drilling cycle (drill1) looks nearly same at the tapping cycle (drill2)

is this an issue with my post processor not defining the cycle buy creating correct gcode. Thanks

Re: Creating code for tapping

serge.quiblier — Wed, 07 Sep 2022 09:45:48 GMT

are you sure the toolpath is defined using the correct cycle :

Are you using the correct tool. It should be less critical, but we may use the pitch in the tool defintion for outputting the cycle.

These two factors will orient the post to the cycle.

But the post may be wrong, in the actual library post for Fagor, it is using the classical G84 for outputting the cycle.

So, do you use the Autodesk post from the library? Is it up to date?

If not, update, contact your post provider for fixes....

Cheers

______________________________________________________________

If my post answers your question, please click the "Accept Solution" button. This helps everyone find answers more quickly!