https://forums.autodesk.com/t5/fusion-support-forum/pattern-along-path-start-point-and-spacing-broken/m-p/11405126#M51055 <P>There is a disconnect when using pattern along path and having a non zero starting point. If an object is offset from the start of a path (start point) then spacing distance (spacing not extents) for a inline object (path direction, not inline path) does not reflect the assigned spacing. The math is all kinds of wrong.&nbsp;</P><P>&nbsp;</P><P>only with an object with a path starting from the center point will path direction patterns with spacing assigned have proper spacing.&nbsp;</P> Wed, 07 Sep 2022 04:52:31 GMT QuinnCampbell 2022-09-07T04:52:31Z https://forums.autodesk.com/t5/fusion-support-forum/pattern-along-path-start-point-and-spacing-broken/m-p/11405126#M51055 <P>There is a disconnect when using pattern along path and having a non zero starting point. If an object is offset from the start of a path (start point) then spacing distance (spacing not extents) for a inline object (path direction, not inline path) does not reflect the assigned spacing. The math is all kinds of wrong.&nbsp;</P><P>&nbsp;</P><P>only with an object with a path starting from the center point will path direction patterns with spacing assigned have proper spacing.&nbsp;</P> Wed, 07 Sep 2022 04:52:31 GMT https://forums.autodesk.com/t5/fusion-support-forum/pattern-along-path-start-point-and-spacing-broken/m-p/11405126#M51055 QuinnCampbell 2022-09-07T04:52:31Z https://forums.autodesk.com/t5/fusion-support-forum/pattern-along-path-start-point-and-spacing-broken/m-p/11407211#M51056 <P>Yep, and the best you get, is “We know about that”.</P> Wed, 07 Sep 2022 22:11:32 GMT https://forums.autodesk.com/t5/fusion-support-forum/pattern-along-path-start-point-and-spacing-broken/m-p/11407211#M51056 davebYYPCU 2022-09-07T22:11:32Z