topic Fusion non responding after creating machining operations from template in Fusion Support Forum

Fusion non responding after creating machining operations from template

PG.Eng2 — Fri, 23 Sep 2022 08:15:29 GMT

Try to use a previously saved template for lathe operations that worked before.

After clicking create from template Fusion360 is non-responding.

I have a screencast, which the autodesk forum will not let me add using the insert screencast option because:

" Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied

Maybe Autodesk can fix this one along the way as well?

I could give you the link to the screencast recording....if not clicking the go to my screencasts button in the screencast program gave a blank website in Chrome.

Re: Fusion non responding after creating machining operations from template

PG.Eng2 — Tue, 20 Sep 2022 10:54:21 GMT

To make it a bit more interesting.

While typing above forum post Fusion was still non-responsive in the background.

Closed Fusion with task manager.

Restarted Fusion.

Get a message that there is a recovery file for the design file that was stuck before.

Opened that, and Fusion has created the operations from template in the recovery file.

Re: Fusion non responding after creating machining operations from template

Steven_Gao — Wed, 21 Sep 2022 02:41:59 GMT

Thanks for the additional information. Is it a little time-consuming operation? Do you have a chance to try it again and waiting for a little long time?

Thanks,

Steven

Re: Fusion non responding after creating machining operations from template

PG.Eng2 — Wed, 21 Sep 2022 04:58:30 GMT

Already tried on 2 different computers. Same result.

These few operations take a couple of seconds to generate when manually clicking the generate operations button for the complete setup when the template did work before.