https://forums.autodesk.com/t5/fusion-support-forum/inaccuracies-in-dxf-after-export/m-p/11445765#M49804 <P>If you right click on the sketch, in the Browser, and create the DXF from the context menu this will not happen. &nbsp;You are probably using the Export command and using the Cloud conversion method. &nbsp;This method uses centimeters as the units so if you are using any other units in your sketch it will appear that your DXF is wrong.</P> Mon, 26 Sep 2022 14:27:24 GMT jhackney1972 2022-09-26T14:27:24Z https://forums.autodesk.com/t5/fusion-support-forum/inaccuracies-in-dxf-after-export/m-p/11445409#M49803 <P>When I export a sketch as a DXF all the dimentions get changed</P> Mon, 26 Sep 2022 11:54:34 GMT https://forums.autodesk.com/t5/fusion-support-forum/inaccuracies-in-dxf-after-export/m-p/11445409#M49803 jackmillen2006 2022-09-26T11:54:34Z https://forums.autodesk.com/t5/fusion-support-forum/inaccuracies-in-dxf-after-export/m-p/11445765#M49804 <P>If you right click on the sketch, in the Browser, and create the DXF from the context menu this will not happen. &nbsp;You are probably using the Export command and using the Cloud conversion method. &nbsp;This method uses centimeters as the units so if you are using any other units in your sketch it will appear that your DXF is wrong.</P> Mon, 26 Sep 2022 14:27:24 GMT https://forums.autodesk.com/t5/fusion-support-forum/inaccuracies-in-dxf-after-export/m-p/11445765#M49804 jhackney1972 2022-09-26T14:27:24Z