topic Re: Issue with flat pattern view orientation X bend direction in Fusion Support Forum

Issue with flat pattern view orientation X bend direction

duomaq — Tue, 25 Oct 2022 20:22:53 GMT

Hello Dear,

I'm facing an issue when I try to get bend directions in drawing mode.

I have a sheet metal object, then I created a flat pattern.

After that, I switched from Design to Drawing mode and placed 2 base views from my flat pattern. One for front view and another for back view.

I put the bend notes in both and the result is that the orientation of the bends are the same, but it must not to be.

For example, if one is down 90° the other must be up 90°.

It's a bug ? What can I do to not be mistaken by this ?
(It seems that the front view is the correct one)

Ivan Alves

Brazil

Re: Issue with flat pattern view orientation X bend direction

johnsonshiue — Tue, 25 Oct 2022 23:42:40 GMT

Hi! It should work. If possible, please share the sheet metal f3d file here. I would like to understand this behavior better.

Many thanks!

Re: Issue with flat pattern view orientation X bend direction

liang_chen — Wed, 26 Oct 2022 06:39:01 GMT

Hi duomaq,

Thanks for the feedback. I can reproduce this issue in a normal SheetMetal case, and it has been reported as internal ticket(FDWG-15860) to Dev team for investigation.

Thanks

Fred